It is specially used for the replacement of integrated circuits and multi-foot switch!
Check whether the voltage is consistent, too high or too low voltage is not conducive to use.
Before using, spin the cylinder and the suction nozzle tight to prevent leakage. Otherwise, it will affect the suction.
Clear the solder impurities in the suction nozzle and the cylinder frequently, and add a little oil to the piston.
Every time after using, push the piston 3-4 times to remove the residual straw for the suction nozzle and straw's next smooth use.
The suction device is strictly prohibited to install and remove part of its electric parts when powered on.
It's normal that there is slightly smoke due to heating when the first time to use the new suction pump. It will naturally disappear after ten minutes.
When using, a natural cooling soldering iron base must be equipped and the suction pen should be placed in the iron base.
If the power cord is damaged, to avoid danger it must be replaced by the manufacturer or maintenance department or similar full-time personnel.
This product has a ground wire which should be used along with a socket with contacts.
We understand that buying online sometimes leads to receiving items that do not meet all of your expectations. This is why we want to give you plenty of time to test our products and determine if it's the right fit for you, providing a ZERO risk buying experience. Although a rare occasion with our products, if it so happens that the product you ordered is not what you thought it would be, contact us and we'll make it right.
We have 24/7 Customer Support. Don't hesitate to contact us if you need any assistance!